home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Precision Software Appli…tions Silver Collection 4
/
Precision Software Applications Silver Collection Volume 4 (1993).iso
/
new
/
condor30.arj
/
PIBTERM.TXT
< prev
next >
Wrap
Text File
|
1993-06-15
|
1KB
|
36 lines
PIBTERM is another terminal that will work with CONDOR.SYS
and the version I tested it on is from 1987! Gee see
how hard it would be for those big gun terms to support
CONDOR?! Give me a break!
PIBTERM can be downloaded from Lazy Eight BBS 205-837-1681 v.32bis
How to get CONDOR.SYS to work with PIBTERM:
1. Install CONDOR.SYS put a line like
device=condor.sys
in your config.sys file and delete any other
line in the config.sys that loads any other
ansi.sys then reboot.
2. Configure PIBTERM to 8 data bits, NO parity,
and 1 stop bit.
3. From PIBTERM type ALT-P select terminal emulation
then set terminal type to DUMB, in that same menu set
also option 'm' DOS console output to YES.
Hit esc and select WRITE settings to disk.
You might want to rerun PIBTERM to make sure the
settings load in.
4. Doesn't work? Just double check the settings and make sure
they are what I said. I tried this with PIBTERM402.
It may have some minor problems because of the screen
mode switching, I'm hoping it won't be to bad,
I only tested Condor with PIBTerm for a short while.
If you don't like PIBTerm you might want to try
COM-AND or BIG103, they work with CONDOR too.